Products:

. With the functions of white balance and color analyzer, accurately measure Chromaticity coordinates and luminance of LCD and rear-projection TV.

. Compatible to measure and automatically adjust White Balance of CRT, LCD, PDP, such as general and rear-projection TV and HDTV.

. Support by I 2C bus and RS232 serial communication automatically adjusting white balance.

Main Specifications:

. Test functions: luminance Y, Chromaticity coordinates (x, y) JND, at the same time simulation show that ? R / G, ? B / G, ? G.

. Two chroma sensor detector: measured bright and dark field, luminance measurement error is less than ± 2% (after calibration).

. Luminance measurement range: bright field 30 ~ 999cd / m 2, dark field 0.2 ~ 50cd / m 2.

. Chromaticity coordinates measurement error: x, y = ± 0.002 (after calibration).

. Memory Channels: 30, long memory, easily corrected.

. Channel for setting parameters: 100, enough for 100 kinds of TV.

. Automatically adjust white balance: support the adjustment of the automatic white balance under a variety of color temperature of VGA, AV, Yprpb signal. Each signal supports up to six kinds of color temperature and six consecutive resolutions to automatically adjust white balance.

. Measurement distance: 0 ~ 140 mm .

. Installation of the probes: placed horizontally or vertically.

. White Balance signal: AV, VGA, YPrPb, and other analog and digital signals, with luminance automatically tracking. Signal mode can be set to support 640 × 480, 800 × 600, 1024 × 768, 1920 × 1080 (I, P) , 576I, 480I, 720P, etc

. Measurement speed: the speed of each color temperature mode about five seconds.

. Probe driving distance: 200mm .

. Communication Interface: The I 2C bus interface and RS232 serial interface.

. System components: the IPC, the probe drive, bright, dark field detectors, signals deal board, AV signal boards, bus interface board, VGA signal boards, VGA adapter plate, CM-2100 white balance Measurement System Manual.