Products:

. May by contact measure luminance, the measurement results through the RS232 serial output.

. Equipment can be self-calibration, measurement results as the same as BM-7 and other equipment.

. Single machine can be used independently, direct readings, with rapid, accurate, and other characteristics.

. When luminance measurements below the lower limit of luminance settings or the average lower than the setting standard, make automatic alarm.

Main Specifications:

. Luminance range: (0.01 ~ 9999) × 10cd / m 2, automatic switching range;

. Measurement method: contact measurement, the longest cable of detector is two meters;

. Luminance measurement accuracy: ± 2% (after calibration), repeat accuracy: ± 1%;

. Display: four LED digital display;

. Zero: auto-zero;

. Calibration: calibration results automatically saved, long-term memory;

. Data output: RS232 serial output;

. Measurement speed: 4 times / sec;

. Instrument Size: 200 × 260 × 160 (mm);

. Work voltage: 220V.

Comparison of LM-10 Tester to BM-7 color luminance:

. No aim, detect as soon as contact LCD TV.

. Luminance measurements of dark field is more accurate;

. Measured at close range on line, without darkroom;

. The detector instrument separate with the core, the measurement results direct viewing display, the keyboard is easy to operate;

. With automatic alarm function to facilitate the testing and use.

. Measurement results in line with the BM-7, much lower than the price of BM-7, cost-effective;

. Technical support and after-sales service is more thoughtful.